Products – tagged "Spray Paint" – Page 2

Dirty Down Dirty Down Ageing Spray: Mid Brown $21.95 $25.00

Mid Brown ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty brown/green colour, a slightly greener shade than Dark Brown. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Ageing sprays are water soluble, semi-transparent sprays for ageing costumes and props. One quick spray deposits a fine layer of semi-transparent coloured dye that makes clean surfaces appear to be dirty and old, or to have “aged”. Quick and easy to use. If you are buying just one spray, then make it Mid Brown ageing spray or Dark Brown. Both are good for an ageing base coat, or on its own for almost any type of ageing effect. Usage Instructions Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Sold out -13% sale

Dirty Down Dirty Down Ageing Spray: Mould $21.95 $25.00

Mould ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty mould green colour. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Ageing sprays are water soluble, semi-transparent sprays for ageing costumes and props. One quick spray deposits a fine layer of semi-transparent coloured dye that makes clean surfaces appear to be dirty and old, or to have “aged”. Quick and easy to use. Mould ageing spray is a mouldy blue/green colour. Apply a light coat for a background colour. Add several coats and the colour is much more visible. Usage Instructions Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Sold out -13% sale

Dirty Down Dirty Down Ageing Spray: Nicotine Yellow $21.95 $25.00

Nicotine Yellow ageing spray is a fine mist semi-transparent spray dye that makes things look dirty, old, or aged. Dirty yellow color. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Ageing sprays are water soluble, semi-transparent sprays for ageing miniatures, costumes and props. One quick spray deposits a fine layer of semi-transparent colored dye that makes clean surfaces appear to be dirty and old, or to have “aged." Quick and easy to use. Nicotine Yellow ageing spray is the color of cigarette stain. When sprayed on to fabrics it has the appearance of a cigarette stain and when sprayed on white paper it makes it look just like old parchment. This light shade works well as a highlight when used with the other darker brown colors. When washed, leaves yellow stains on fabric. Usage Instructions Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may streak, drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Sold out -13% sale

Dirty Down Dirty Down Ageing Spray: Rust $21.95 $25.00

Rust ageing spray is a fine mist semi-transparent spray dye that makes things look dirty and old, or aged. Dirty rusty red colour. The spray is water soluble and can be smeared and reworked by wetting with water. Fast drying. Ozone friendly. Ageing sprays are water soluble, semi-transparent sprays for ageing costumes and props. One quick spray deposits a fine layer of semi-transparent coloured dye that makes clean surfaces appear to be dirty and old, or to have “aged”. Quick and easy to use. Rusty red/brown colour with shades of orange and yellow. Very good when used for shading. Rust ageing spray is often used in combination with acrylic paints to mimic real rust. Usage Instructions Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

Sold out -13% sale

Dirty Down Dirty Down Ageing Spray: Soot Black $21.95 $25.00

Soot Black ageing spray has a stronger, more powerful spray nozzle than our other ageing sprays. The spray deposits a semi-opaque layer of black dye that creates a dirty, black old or aged look. The spray is water soluble and can be smeared and reworked by wetting with water, but much less water soluble than our other ageing sprays. Fast drying. Ozone friendly. Ageing sprays are water soluble, semi-transparent sprays for ageing costumes and props. Soot Black is our darkest ageing spray colour, almost opaque and is the least translucent spray out of all the ageing spray colours. One quick spray deposits a fine layer of semi-opaque coloured dye that makes clean surfaces appear to be “sooty” coal black, dirty and old, or to have “aged”. Quick and easy to use. Soot Black ageing spray is great for coal and grease stains and graffiti. Least washable and least water soluble of all of the ageing sprays. Usage Instructions The spray comes out at a faster speed than other ageing sprays – it’s best to test before use. Ensure surfaces are dry and grease free. Mask areas not to be sprayed. Shake can before use. Use sparingly, apply several fine coats rather than one heavy coat. The shade will darken with each coat applied. Hold can upright 30cm (12 inches) away from the surface, and spray across the surface in one smooth sweep, keeping the nozzle fully depressed. Spots of concentrated dye may appear if the button is only partially depressed. For small patches, spray through holes cut in a piece of paper. For dark patches, spray closer to the surface. Heavy spraying may drip or puddle. Smear the spray by re-wetting with water, and then dabbing or rubbing with a damp or wet cloth. With some fabrics it’s easier to smear by wetting the sprayed fabric and then rubbing the wet area together between your hands. Smearing is easier when the spray is still wet, but is also possible after the spray has fully dried. It may not be possible to smear spray applied to absorbent surfaces. May not adhere to some polished surfaces. Our ageing sprays are water soluble and the effects of spraying will be lost by washing in water, but there may still be staining. Do not use outside in wet weather. Ageing spray may cause permanent staining. Test before use on off-cuts or hidden surfaces, and then wash to check for any staining.

-5% sale

Monument Hobbies: Proacryl Spray - Clear Matte Varnish

Monument Hobbies Monument Hobbies: Proacryl Spray - Clear... $17.75 $18.50

The best quality in the biggest cans equals the best value! Our Clear Matte Spray is the best final touch to make sure your paint job is protected for use on the table or displayed for all to see. PRO Acryl Sprays are the best and quickest way to prime and seal your latest projects! In partnership with The Colour Forge, we've formulated the ultimate matte finish sprays for use on plastic, resin, and metal models. No matter if you're looking to paint a full army of the Emperor's finest or doing your first 3D print, we've literally got you covered! Each can of PRO Acryl Clear Matte Varnish Spray is 500 ml of the highest quality varnish you'll find! For the best results when spraying: 1. Shake the can thoroughly for 5 minutes. 2. In colder conditions, pour warm water over the body of the can to bring it up to room temperature. 3. Always spray on a test surface to ensure proper operation. 4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered. 5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

-5% sale

Monument Hobbies: Proacryl Spray - Matte Black Primer

Monument Hobbies Monument Hobbies: Proacryl Spray - Matte... $17.75 $18.50

The best quality in the biggest cans equals the best value! PRO Acryl Sprays are the best and quickest way to prime and seal your latest projects! In partnership with The Colour Forge, we've formulated the ultimate matte finish sprays for use on plastic, resin, and metal models. No matter if you're looking to paint a full army of the Emperor's finest or doing your first 3D print, we've literally got you covered! Each can of PRO Acryl Matte Black Spray is 500 ml of the highest quality primer you'll find! For the best results when spraying: 1. Shake the can thoroughly for 5 minutes. 2. In colder conditions, pour warm water over the body of the can to bring it up to room temperature. 3. Always spray on a test surface to ensure proper operation. 4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered. 5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

-5% sale

Monument Hobbies: Proacryl Spray - Matte Grey Primer

Monument Hobbies Monument Hobbies: Proacryl Spray - Matte... $17.75 $18.50

The best quality in the biggest cans equals the best value! PRO Acryl Sprays are the best and quickest way to prime and seal your latest projects! In partnership with The Colour Forge, we've formulated the ultimate matte finish sprays for use on plastic, resin, and metal models. No matter if you're looking to paint a full army of the Emperor's finest or doing your first 3D print, we've literally got you covered! Each can of PRO Acryl Matte Grey Spray is 500 ml of the highest quality primer you'll find! For the best results when spraying: 1. Shake the can thoroughly for 5 minutes. 2. In colder conditions, pour warm water over the body of the can to bring it up to room temperature. 3. Always spray on a test surface to ensure proper operation. 4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered. 5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

-5% sale

Monument Hobbies: Proacryl Spray - Matte White Primer

Monument Hobbies Monument Hobbies: Proacryl Spray - Matte... $17.75 $18.50

The best quality in the biggest cans equals the best value! PRO Acryl Sprays are the best and quickest way to prime and seal your latest projects! In partnership with The Colour Forge, we've formulated the ultimate matte finish sprays for use on plastic, resin, and metal models. No matter if you're looking to paint a full army of the Emperor's finest or doing your first 3D print, we've literally got you covered! Each can of PRO Acryl Matte White Spray is 500 ml of the highest quality primer you'll find! For the best results when spraying: 1. Shake the can thoroughly for 5 minutes. 2. In colder conditions, pour warm water over the body of the can to bring it up to room temperature. 3. Always spray on a test surface to ensure proper operation. 4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered. 5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Find anything you need

Products (34)

Subscribe and Save

CUSTOMER SERVICE

FREE DELIVERY

EASY RETURNS